Port Forwarding - Gateway

1. Open Your Web Browser (i.e. Internet Explorer, or Firefox etc…)

2. Type in your Router's IP Address in your browser's web address bar. (i.e. http://192.168.0.1).  If you do not know your Router's IP Address follow these instructions below to find it:

a. Click START (Windows Only)
b. Click RUN
c. Type in: “cmd” in the open field and click OK
d. When the new window appears (black window) type “ipconfig” and press ENTER
e. A list of numbers should appear in the window.  The numbers that appear after Default Gateway will be the IP Address of your Router. 
f. Copy that number and type it in your web browser. (remember to use “http://” in front of the numbers)

Press Enter.

3. On the left menu, under the Firewall category, select the Virtual Servers.

4. A Login screen will appear and prompt for your password. By default, the password is left blank. Proceed to click Submit.

5. You are now ready to input HomeRemote's port assignments.

6. Check the Enable checkbox.
In the Description field, type "HRGatewayWeb" for your Gateway. This will assign a name to the device whose web port you are opening.
Enter 80 in both of the Inbound Port field. If port 80 is unavailable, enter another port number (for example: port 81).
In the Protocol Type field, select TCP.
In the Private IP field, enter your Local IP Address.
(How to Find your Local IP Address)
Enter 80 in both of the Private Port field. If port 80 is unavailable, enter another port number (for example: port 81).

7. Click Apply Changes at the top of the field.

Congratulations! Your HomeRemote's port assignments should now appear in the Virtual Servers list. .