Port Forwarding - Gateway

D-Link DI-704P

1. Open Your Web Browser (i.e. Internet Explorer, or Firefox etc…)

2. Type in your Router's IP Address in your browser's web address bar. (i.e. http://192.168.0.1). If you do not know your Router's IP Address follow these instructions below to find it:

a. Click START (Windows Only)
b. Click RUN
c. Type in: “cmd” in the open field and click OK
d. When the new window appears (black window) type “ipconfig” and press ENTER
e. A list of numbers should appear in the window. The numbers that appear after Default Gateway will be the IP Address of your Router.
f. Copy that number and type it in your web browser. (remember to use “http://” in front of the numbers)

Press Enter.

3. A login dialog box should open, as shown below.

Enter the Username and Password you have set for your router in the dialog box. By default, the Username is "admin", and the Password field is left blank. Click OK to open your router's administration page.

4. Your router's administration page should open, as shown below.

Click the Advanced tab located in the horizontal navigation bar to open a new set of links along the left menu bar.

5. In the new set of links, click the Virtual Server link to open the Virtual Server page. You must open the following ports for web, video and audio (You will only need to open an audio port if your Hawking camera supports audio).

STEP 6: OPEN A WEB PORT
Enter an ID number that represents this port (ie. 1). This number should not be used by another device.
Check the Enable button.
In the Service Ports field, enter 80 in both of the Port field. If port 80 is unavailable, enter another port number (for example: port 81).
In the Service IP field, enter your Local IP Address.
(How to Find your Local IP Address)
In the Schedule field, check the Always button.
Click Apply to save your changes.

7. Your HomeRemote's port assignments should now appear in the Virtual Servers list below.

8. Congratulations! You are now set.