| HawkingTech HWR54G Rev. M
|
| |
1. Open Your Web Browser (i.e. Internet Explorer, or Firefox
etc…)
2. Type in your Router's IP Address in your browser's web
address bar. (i.e. http://192.168.1.254). If you do
not know your Router's IP Address follow these instructions
below to find it:
a. Click START (Windows Only)
b. Click RUN
c. Type in: “cmd” in the open field and click OK
d. When the new window appears (black window) type “ipconfig”
and press ENTER
e. A list of numbers should appear in the window.
The numbers that appear after Default Gateway will be the
IP Address of your Router.
f. Copy that number and type it in your web browser. (remember
to use “http://” in front of the numbers)
Press Enter. |
| |
 |
| |
|
| |
3. A login dialog
box should open, as shown below.
Enter the Username and Password you have set for your router
in the dialog box. By default, the Username is "admin",
and the Password field is blank. Click OK
to open your router's administration page.
|
| |
 |
| |
|
| |
4.
At the very top menu, click the Advanced button.
|
| |
|
| |
|
| |
5. Under the Advanced Features categroy, click the Virtual Servers link.
|
| |
 |
| |
STEP 5a: OPEN A WEB PORT
Check the Enable box.
In the name field, type "HRGatewayWeb"
for your gateway. This will assign a name to the device whose
web port you are opening.
Select your PC (Server) by using the drop down menu.
In the Protocol field, select TCP.
in the Internal Port No. field, enter port 80~80. If port 80 is unavailable,
enter another port number (for example: port 81~81).
Then enter the same port number in the External Port No. field.
(It is highly recommended that you enter the same port number in the Internal Port No.
field as you entered in the External Port No. field.)
Click the Update Selected Server to save your changes.
|
| |
 |
| |
|
| |
Congratulations, you are all set! Please return to the HomeRemote setup wizard.
|
| |
