Port Forwarding - Gateway

Linksys WRT150N

1. Open Your Web Browser (i.e. Internet Explorer, or Firefox etc…)

2. Type in your Router's IP Address in your browser's web address bar. (i.e. http://192.168.1.1). If you do not know your Router's IP Address follow these instructions below to find it:

a. Click START (Windows Only)
b. Click RUN
c. Type in: “cmd” in the open field and click OK
d. When the new window appears (black window) type “ipconfig” and press ENTER
e. A list of numbers should appear in the window. The numbers that appear after Default Gateway will be the IP Address of your Router.
f. Copy that number and type it in your web browser. (remember to use “http://” in front of the numbers)

Press Enter.

3. In the login dialog box, enter your Username and Password. By default, the Username should be admin or left blank, and the Password is admin.

Click OK to open your router's administration page.

4.Click the Applications & Gaming tab located in the horizontal navigation bar.

5. Click the Single Port Forwarding.

6. In the Application Name box, type "HRGatewayWeb". This will assign a name to the device whose web port you are opening.

Enter 80 in the External Port and the Internal Port boxes. If you are currently using port 80 for another device, please use port 81 ~ 81 or another port protocol.

Under the Protocol setting, select TCP.
In the "To IP Address" field, enter your HawkingTech device IP Address.
(How to Find your Local IP Address)
Check the Enabled box.
Click Save Settings at the bottom of the page to save your changes.

Congratulations, you have completed the port forwarding for your Gateway!