Port Forwarding - Gateway

Netgear DG632

1. Open Your Web Browser (i.e. Internet Explorer, or Firefox etc…)

2. Type in your Router's IP Address in your browser's web address bar. (i.e. http://192.168.0.1). If you do not know your Router's IP Address follow these instructions below to find it:

a. Click START (Windows Only)
b. Click RUN
c. Type in: “cmd” in the open field and click OK
d. When the new window appears (black window) type “ipconfig” and press ENTER
e. A list of numbers should appear in the window. The numbers that appear after Default Gateway will be the IP Address of your Router.
f. Copy that number and type it in your web browser. (remember to use “http://” in front of the numbers)

Press Enter.

3. A login dialog box should open, as shown below.

Enter the Username and Password you have set for your router in the dialog box. By default, the Username is "admin", and the Password field is either passwork or 1234. Click OK to open your router's administration page.

4. You will then be brought to your router's administration page. The left menu bar should look something like the image below.

Under Security in the left menu bar of the administration page, click on the Services link.

STEP 5: OPEN A WEB PORT

Click the Add Custom Services.

In the Name field, type "HRGatewayWeb" for your Gateway. This will assign a name to the device whose web port you are opening.
In the Protocol field, select TCP/ UDP.
in the Port Start field, enter port 80. If port 80 is unavailable, enter another port number (for example: port 81).
Then enter the same port number in the Port End field. (It is highly recommended that you enter the same port number in the Port Start field as you entered in the Port End field.)
Click Apply at the bottom of the page to save your changes.

6. Under the Inbound Services section, click Add.

7. In the LAN Server IP Address field, enter the HawkingCam IP address listed on the left side of this page. (How to Find your HawkingCam IP Address)
In the Category field, set to Servers.
In the Service drop down list, select the Hawking Camera entry that you just created, and click on Apply.

Congratulations! Your Gateway port assignments should now appear in the Inbound Service Rule Managment list. Complete the Setup Wizard and enjoy.