ActionTec GT701-WG
1. Open Your Web Browser (i.e. Internet Explorer, or Firefox etc…) 2. Type in your Router's IP Address in your browser's web address bar. (i.e. http://192.168.0.1).  If you do not know your Router's IP Address follow these instructions below to find it: a. Click START (Windows Only) b. Click RUN c. Type in: “cmd” in the open field and click OK d. When the new window appears (black window) type “ipconfig” and press ENTER e. A list of numbers should appear in the window.  The numbers that appear after Default Gateway will be the IP Address of your Router.  f. Copy that number and type it in your web browser. (remember to use “http://” in front of the numbers) Press Enter.
3. The Main Menu will appear in your web browser. Click on Setup / Configuration.
4. Select Advanced Setup in the left menu of the Set Up / Configuration.
5. The Advanced Setup settings will appear in the content. Click Begin Advanced Setup.
6. Select the Port Forwarding link under the Advanced Setup menu on the left.
7. Enter 80 to 80 in the IP Port Range field. Select TCP for the Protocol. Enter the IP Address of the computer on the network to be used as a host. (How to Find your Local IP Address) Click Add.
8. Then Add port 5000 to 5000 in the IP Port Range with TCP Protocol, and your Local IP Address (How to Find your Local IP Address). Lastly, Add port 5001 to 5001 in the IP Port Range with TCP Protocol, and your Local IP Address (How to Find your Local IP Address). You will see all three entries in the List of Forwarded Ports box. Finally click Save and Restart at the bottom left screen.
9. Congratulations, you are now set. Please return to the HawkingTech setup wizard.