D-Link DI-704
1. Open Your Web Browser (i.e. Internet Explorer, or Firefox etc…) 2. Type in your Router's IP Address in your browser's web address bar. (i.e. http://192.168.0.1).  If you do not know your Router's IP Address follow these instructions below to find it: a. Click START (Windows Only) b. Click RUN c. Type in: “cmd” in the open field and click OK d. When the new window appears (black window) type “ipconfig” and press ENTER e. A list of numbers should appear in the window.  The numbers that appear after Default Gateway will be the IP Address of your Router.  f. Copy that number and type it in your web browser. (remember to use “http://” in front of the numbers) Press Enter.
3. A login dialog box should open, as shown below. By default, the System Password is "admin." Click Log in to open your router's administration page.
4. Your router's administration page should open, as shown below. Click the Advanced tab located at the bottom of the page.
5. On the bottom of the screen, click on the Virtual Server link to open the Virtual Server page,which is shown below. .
STEP 5a: OPEN A WEB PORT In the first available Service Port field, enter port 80 . If port 80 is unavailable, enter another port number (for example: port 85). In the Server IP field, enter your camera's Server IP Address. (How to Find your Local IP Address) Check the Enable box. STEP 5b: OPEN A VIDEO PORT In the second available Service Port field, enter port 5000 . If port 5000 is unavailable, enter another port number (for example: port 5001). In the Server IP field, enter your camera's Server IP Address. (How to Find your Local IP Address) Check the Enable box. STEP 5c (OPTIONAL): OPEN AN AUDIO PORT (not necessary for HNC290G) In the third available Service Port field, enter port 5002 . If port 5002 is unavailable, enter another port number (for example: port 5003). In the Server IP field, enter your camera's Server IP Address. (How to Find your Local IP Address) Check the Enable box.
6. On the bottom of the screen, click Save button. Then you will be prompt to click on the Reboot button. This will apply changes to your router. Congratulations! Your Hawking's port assignments should now appear in the Virtual Servers list. Now please return to the HawkingTech Setup Wizard.