How to Access Your Device(s) Remotely Over the Internet
Linksys WRK54G |
| |
1. Open a Web
browser.
2. Type in your Router's IP Address in your browser's web
address bar. (i.e. http://192.168.0.1). If you do not
know your Router's IP Address follow these instructions below
to find it:
a. Click START (Windows Only)
b. Click RUN
c. Type in: “cmd” in the open field and click OK
d. When the new window appears (black window) type “ipconfig”
and press ENTER
e. A list of numbers should appear in the window.
The numbers that appear after Default Gateway will be the
IP Address of your Router.
f. Copy that number and type it in your web browser. (remember
to use “http://” in front of the numbers)
After you retrieve and enter your Router's IP Address in your
browser, press Enter.
|
| |
 |
| |
|
| |
2. In the login
dialog box, enter your Username and Password. By default, the
Username should be left blank and the Password is admin.
Click OK to open your router's administration page. |
| |
 |
| |
|
| |
3. Your
router’s administration page should look something like
the image below. Click the Applications and Gaming tab located
in the horizontal navigation bar to open a new set of links
below the Applications and Gaming tab. |
| |
|
| |
|
| |
4. In the new
set of links, click the Port Range Forward link to open the
Port Range Forward page, which is shown below. |
| |
 |
| |
|
| |
5. In the Port Range section of the page, locate the Application
column. In the first empty text field in the Application column,
type in what you want to name your hawking device. Such as:
Hawk_cam1
Enter the Starting Port number in the Start entry field, and
the Ending Port number in the End entry field. It is prefered
that you use port numbers 80 ~ 80 for your Web access, 5000
~ 5000 for Video access. And if your HawkingTech product supports
audio use port numbers 5001 ~ 5001.
In the Protocol field, select TCP.
In the IP Address field, enter your HawkingTech device IP
Address.
(How to Find
your Local IP Address)
Make sure that the Enabled checkbox is checked.
Click Save Settings at the bottom of the page to save your
changes. Unless you do this, your router will not be configured.
|
 |
Congratulations! You’ve done it.
|
| |
|
