1. Open a Web browser.

2. Type in your Router's IP Address in your browser's web address bar. (i.e. http://192.168.0.1).  If you do not know your Router's IP Address follow these instructions below to find it:

a. Click START (Windows Only)
b. Click RUN
c. Type in: “cmd” in the open field and click OK
d. When the new window appears (black window) type “ipconfig” and press ENTER
e. A list of numbers should appear in the window.  The numbers that appear after Default Gateway will be the IP Address of your Router. 
f. Copy that number and type it in your web browser. (remember to use “http://” in front of the numbers)

After you retrieve and enter your Router's IP Address in your browser, press Enter.

2. In the login dialog box, enter your Username and Password. By default, the Username should be left blank and the Password is admin.

Click OK to open your router's administration page.

4. In the new set of links, click the Port Range Forwarding link to open the Port Range Forwarding page, which is shown below.

5. In the Port Range section of the page, locate the Application column. In the first empty text field in the Application column, type in what you want to name your hawking device. Such as: Hawk_cam1

Enter the Starting Port number in the Start entry field, and the Ending Port number in the End entry field. It is prefered that you use port numbers 80 ~ 80 for your Web access, 5000 ~ 5000 for Video access. And if your HawkingTech product supports audio use port numbers 5001 ~ 5001.
In the Protocol field, select TCP.
In the IP Address field, enter your HawkingTech device IP Address.
(How to Find your Local IP Address)
Click Save Settings at the bottom of the page to save your changes. Unless you do this, your router will not be configured.